Electrical Engineering News and Products

by Bruno Damien, Ecosystem Marketing Director at e-peas. Most IoT devices still rely on a disposable battery, and that battery is often the weakest link in the design. It drives recurring cost, whether that means a consumer replacing a coin cell or a facilities team truck-rolling to service sensors across multiple sites. The EU estimates […] The post Six steps for designing IoT systems powered by…

TDK Corporation has introduced the TDK-Lambda TPF12500-385 series of non-isolated three-phase power supplies, delivering up to 13.1 kW with a nominal output of 12.5 kW at 385 Vdc and typical efficiency of 97.5%. Designed for distributed power architectures, DC microgrids and high-voltage DC-DC converters, the series accepts 360–528 Vac Delta or Wye inputs and supports […] The post Three-phase sup…

Signal Hound has introduced Radar Pulse Generator, a licensed upgrade for its VSG60 and VSG200 signal generators that creates radar pulse trains with configurable pulse shape, timing, coding, modulation and antenna scan patterns. The software includes a sequence editor, supports CW, linear chirp, Barker, polyphase, Frank and custom pulse formats and can be used to […] The post Radar software gene…

ITG Electronics has introduced the C201371B Series of 300 VAC NanoCrystal common mode chokes with through-hole configurations, inductance values from 0.4 to 11.0 mH, DCR from 20.0 to 380.0 mΩ and maximum current ratings from 4.5 to 0.9 A. Designed for AC-to-DC converters in industrial and automotive equipment as well as commercial and consumer electronics, […] The post 300 VAC chokes reduce EMI i…

Morse Micro’s Wi-Fi HaLow™ USB network adapters use the MM8108 Wi-Fi HaLow chipset and are available in USB-A and USB-C formats for computers, laptops and access points across multiple operating systems. The adapters support connectivity across large properties, remote buildings and temporary field or event locations while providing device makers and developers with a reference […] The post Wi-Fi…

Zonal sensor redundancy begins with a structural shift in vehicle wiring. The industry is moving from function-based networks to geometry-based ones. That single change ripples through sensor placement, latency, and fault tolerance. This article examines how zonal architectures relocate sensors, consolidate the wiring harness, affect communication latency, and reshape fail-operational redundancy.…

Ironwood Electronics has introduced a 70-GHz elastomer socket designed for 37.5 × 37.5-mm BGA packages with a 0.65-mm pitch. The socket is specified to support up to 28 W of power dissipation and is intended to provide performance comparable to a direct-soldered connection while allowing devices to be socketed on an application board. Its design […] The post 70-GHz elastomer socket dissipates 28 …

Alpha and Omega Semiconductor Limited (AOS) has introduced the αMOS E2™ 600 V Super Junction MOSFETs, including the AOGT037V60DE2 and AOGT060V60DE2, for servers, telecom rectifiers, solar inverters, motor drives and industrial power systems. The devices use a top-side-cooled GTPAK™ package with gull-wing leads, a fast body diode and enhanced UIS, inrush-current and safe operating area […] The pos…

TDK Corporation has expanded its CN series of low-resistance soft-termination SMD MLCCs with a 100 V X7R component that provides 10 μF capacitance in a 3225 package measuring 3.2 × 2.5 × 2.5 mm. Designed for 48 V power-line smoothing and decoupling in AI servers, humanoid robots, xEVs and industrial equipment, the CN series MLCC […] The post Soft-termination MLCC reduces ESR in 48 V systems appea…

Teledyne e2v has introduced the Flash™ 1K2 and Flash 8K CMOS image sensors, which deliver 3,000 frames per second at 1K × 1K resolution and 1,800 frames per second at 8K × 1K resolution for high-speed inspection and 3D laser profiling. Both sensors use 6 µm global shutter pixels and support HDR modes up to […] The post Global shutter sensors support high-speed inspection appeared first on Electri…

Infineon Technologies AG introduced the OPTIREG™ PMIC TLE9744QK for high-voltage traction inverter applications in electric and hybrid vehicles. The device integrates power-supply functions, resolver excitation and a dedicated safety engine to support isolated rails for microcontrollers, communication modules and sensors while reducing component count and PCB area. Its Integrated Safety Logic mon…

Situational awareness for humanoid robots is more complex than that needed by standard industrial robots. Humanoids require a semantic understanding of the environment, plus the ability to recognize objects and predict future states. That takes a multi-layered, real-time awareness of their surroundings to operate safely and effectively alongside humans, including walking and grasping objects. Dat…

How VC MEMS accelerometers, angular rate sensors, and 6DoF configurations support motion studies Test articles rarely move in only one way. A vehicle body pitches, rolls, shifts, settles, and responds to input over time. An aircraft component may vibrate under aerodynamic loading while also moving through slower structural modes. A structure may tilt or deflect […] The post Measuring low frequenc…

When testing electric vehicles (EVs) for range in laboratories using a dynamometer, engineers often do not see the same EV’s range on the road. So the first step is isolating each of the variables and studying how they impact EV range individually. This article explains how regenerative braking, cabin heating and cooling, and driving speed […] The post How do engineers correlate dynamometer testi…

Infineon Technologies AG has introduced the TDA235E5 and TDA235E0 dual-phase smart power stages, which integrate OptiMOS™ 6 MOSFETs and a dual-phase driver IC in a 6 × 6 × 0.8 mm³ package for AI accelerators, server CPUs and vertical power delivery modules. The devices support up to 300 A peak current and 120 A total […] The post Dual-phase power stages support 300 A peak current appeared first o…

It’s too late (almost). The first major operational deadline for the EU Cyber Resilience Act (CRA) arrives this Friday, on September 11th, 2026. That’s when mandatory reporting obligations under Article 14 take effect for manufacturers of products with digital elements sold in the EU. What does that mean? The first step to avoiding significant financial […] The post The CRA’s first major deadline…

Sponsored by Jameco Electronics. Industrial automation keeps asking control cabinets to do more in less space. PLCs, sensors, communication devices, motor controls, safety systems and an ever-growing list of electronics now compete for the same DIN rail real estate, while machine builders and system integrators are simultaneously pushed to shrink enclosures, cut energy use and […] The post The DI…

By Alexsander Tamari, Technical Marketing Engineer, Altium PCB design software is often evaluated by the quality of its schematic editor, routing tools, constraint system, and manufacturing outputs. Those functions remain central, but they cover only part of the engineering process once a project involves multiple boards, several contributors, mechanical coordination, controlled components, produ…

XP Power has introduced the ASB320 Series 320 W AC-DC power supplies with single outputs from 12 VDC to 54 VDC in an encapsulated brick format. The units accept 90 to 264 VAC input, achieve efficiency up to 94% and support operation from −40°C to +90°C with baseplate cooling. Integrated EMC filtering, AC fuse, bulk […] The post Baseplate cooling supports operation up to 90°C appeared first on Ele…