JetKVM Mini is a smaller, more affordable JetKVM. It comes in two models: JetKVM Mini with Ethernet for 39andJetKVMMiniW,wireless,for39 and JetKVM Mini W, wireless, for 42. In packs of three, they become even more affordable and drop to 33and33 and 36 per unit. The case is aluminium, 42 × 42 × 23 mm (1.7 × 1.7 × 0.9 in), about the footprint of a matchbox. It does what a JetKVM does: native video capture at 1080p (up to 4K with JetKVM OS Services), keyboard and mouse over USB, the same web interface, the same cloud, the same updates. Wired or wireless JetKVM Mini has an RJ45 port. Plug in Ethernet, video, and the USB cable to the target computer, read the IP address off the display, and open it in a browser. Setup is the same as on every JetKVM. JetKVM Mini W drops the RJ45 for a 2.4 and 5 GHz radio. It is for machines a cable does not reach: a PC in another room, a box under the TV, a rack with no free switch ports. Video and USB are the only cables. Setup happens over Bluetooth from a browser on your phone or laptop: pick a network, enter the password, and the Mini W joins it. Why a Mini We wanted a JetKVM affordable enough to put on every machine, and getting there meant starting over. The Mini isn't a stripped-down JetKVM. It's a JetKVM re-engineered around the things a KVM needs to do well: capture video, control keyboard and mouse, mount virtual media, and stay reachable when the machine it manages is not. The result is a much simpler architecture: an ESP32-P4X handles video capture, H.264 encoding, USB, and the JetKVM firmware without the separate DRAM and eMMC required by a Linux system. Around it, we built a compact aluminium enclosure, a simple status display with physical controls, and the same web interface, cloud, extensions, and update system as JetKVM. It does the job of a JetKVM, in a smaller design that starts at $33. The hardware The Mini runs on an ESP32-P4X, a microcontroller with a hardware H.264 encoder. Video is captured at 1080p at 30 fps or 720p at 60 fps, encoded on the...