ceramics-and-composites

Scientific Reports, Published online: 09 May 2026; doi:10.1038/s41598-026-52265-5 A study on question answering in the ceramics domain using large language models with retrieved triples and generated textual knowledge prompts

Nature Communications, Published online: 08 May 2026; doi:10.1038/s41467-026-72700-5 Non-covalently connecting supramolecular assemblies of structurally distinct π-systems which yield higher-order heterostructures are challenging due to phase segregation into individual components. Here, the authors demonstrate a rational approach to construct fully supramolecular bicomponent higher-order super-h…

Aerospace engineers have to consider numerous factors when designing a spacecraft, but one that comes up more and more often is the need to design against Micro-Meteoroids and Orbital Debris (MMOD). While most designers understand the threat, designing structural solutions capable of withstanding the hypervelocity impacts these undercontrolled pieces of material can cause can take a significant b…

Advanced composites are prized for being light yet strong, but designing them remains a slow and difficult task when both material layout and fiber direction must be optimized together. This study introduces a deep learning method that tackles both problems at once, allowing engineers to generate optimized continuous fiber composite structures far more efficiently than before. The method uses a R…

Scientific Data, Published online: 07 May 2026; doi:10.1038/s41597-026-07391-0 Rheological Measurement Dataset of Resin and Composite Mixtures for Digital Light Processing based Additive Manufacturing

Scientific Reports, Published online: 07 May 2026; doi:10.1038/s41598-026-51204-8 Polypropylene fiber-reinforced geopolymer mortar from coal washing waste and recycled glass powder: mechanical and microstructural performance

Nature, Published online: 06 May 2026; doi:10.1038/s41586-026-10492-w Multilayer capacitors comprising a solid solution of two electrocaloric materials PbSc0.5Ta0.5O3 and PbMg0.5W0.5O3 are shown to maintain high B-site order and latent heat without needing an energetically expensive anneal, enabling efficient refrigeration across room temperature.

Epoxy-derived carbon fiber–reinforced polymer composites are promising for lightweight high-temperature applications, yet their performance after thermal conversion strongly depends on processing conditions. This study investigates the effects of pyrolysis atmosphere (vacuum and argon) and SiC particle addition on the microstructure–property relationships of epoxy-based CFRP and CFRP/SiC laminate…

This article described the investigation of the failed superheater tube made of SA210 Grade C used in a biomass power plant. Visual inspection, microstructural examination, chemical analysis and hardness measurement were employed to analyze the causes of the superheater tube failure. Results from the investigation showed that the major cause of this failure was mainly related to the long-term ove…

A356 alloy based composites are extensively used in different component industries like components of automobile parts owing to pronounced strength to weight ratio. In the current paper, A356/Si 3 N 4 nanocomposites are fabricated by means of stir casting by varying Si 3 N 4 reinforcement nanoparticles. Silicon Nitride (Si 3 N 4 ) nanoparticles is intermixed to Al powder mechanically to develop t…

Aim: The aim of this study is to evaluate and compare the color stability of three commercially available 3D-printed permanent hybrid resin-ceramic crown materials, SprintRay® Ceramic Crown, VarseoSmile® Crown Plus, and Rodin Sculpture™, after exposing the materials to commonly consumed staining beverages. The effect of the immersion media and time on color change was tested using spectrophotomet…

UK registered businesses can apply for a share of up to £2 million for feasibility studies. These studies aim to speed the translation of advanced materials innovations in three prioritised high growth themes and one strategic opportunity theme. Innovate UK

Nature Communications, Published online: 04 May 2026; doi:10.1038/s41467-026-72536-z Cation migration plays a critical role in the evolution of perovskite electrodes but is not fully understood. Here, the authors combine theory and experiment to show that cation migration coupled with phase segregation forms a highly active nanocomposite electrode.

Researchers report crack-free LPBF builds of Ti-modified 6063 aluminum TPMS lattices. The post Crack-Free Ti-Modified 6063 Aluminum TPMS By LPBF appeared on Fabbaloo .

Scientific Reports, Published online: 04 May 2026; doi:10.1038/s41598-026-49264-x Effect of mineralogical composition on the compressive strength and microstructure of metakaolin geopolymer

Scientific Reports, Published online: 03 May 2026; doi:10.1038/s41598-026-51601-z RSM optimized mechanical performance and chemical durability of nano silica, nano alumina fiber reinforced alkali activated mortar

Scientific Reports, Published online: 11 May 2026; doi:10.1038/s41598-026-51054-4 Effect of mullite microcrystal on phase change mechanism of anorthite-based ceramics at low temperatures using electrolytic manganese residue